Our QRS control unit consist of an Apple iPad and is user friendly with big icons in English and local language on various programs or therapies. This iPad generates a controls our QRS module via Bluetooth Low-Energy to produce variable pulsating magnetic field through the applicators such as mattress that generate well-defined frequencies to stimulate the body’s functions.

The QRS intensities and timing are adjusted by a sliding bar on the iPad according to the user’s needs and his or her respective state of health.The scale of intensity adjustment is from 1-5 and duration from 10-60 minutes . You can reset and change the therapies or programs .You can add other Bluetooth diagnostic devices if you wish, up to maximum four devices on same iPad.
The QRS module is powered by 12V 4A DC adapter from 220V or 110V wall socket. The module operates at 5V 2A.
Specifications of QRS Module
| Bluetooth | 2.4-GHz Bluetooth Low Energy
Power Up to 4.5 dBm |
| Communications | Encrypted data link with paired iOS app |
| Resolution | 18-bit DAC music shield |
| Load | 30Ω |
| Output | 15W per channel with protective resistor to mattress |
| Power adapter | 12V DC CE approved |
| Frequency | 0-30Hz |
| Intensity | 9-70µT (Earth intensity=33-66µT)
WHO exposure limit 100µT |
The QRS module produces PEMF in a 68x145cm mattress with 4 insulated wire coils 2Ω, 2.75µT output.

Our full body mattress comes with square of insulated pure copper, tightly wound rectangular coils for upper and lower body with a decreasing magnetic flux from the head towards the feet. What this means is that you want ideally 4 squares of coils one pair for the head and neck, another for the torso, hips ,legs and feet.
The coils toward the upper body should have a lower intensity (lower intensity = lower magnetic flux = smaller number of turns in coil) and the coils toward the feet should have a greater intensity (magnetic flux). This is very important because the legs and feet can handle a much higher intensity than the head and neck (which are the most sensitive area). When walking on the earth the feet naturally experience a slightly higher intensity especially when in contact with the ground. But even more important for people that are chemically sensitive or electro sensitive is that the head and neck/thyroid can be easily over-stimulated and irritated.

